Summit's line of Control Valves
Slurry control valves
A slurry control valve consists of a moving gate which can control the flow through the trim. This valve is used where slurries are present.
More info
V-port ball control valves
A ball valve is a valve with a sphere in the center which has a hole through the middle. When the valve is open, there is flow through the holes.. More Info
V-port knife gate control valves
A knife gate valve is used to limit and control flow. It’s done by either cutting off or allowing flow through the valve. More info
V-port plug control valves
Plug control valves include a circular plug with a hole through the center. The plug can be rotated to control or limit the flow.
More Info
Air release/vacuum valves
Floats operate to allow large amounts of air to be exhausted from or admitted into a water pipeline.
More Info
Butterfly control valves
A butterfly valve is used for regulating or isolating flow by using a rotatable disc. Butterfly valves are usually low in cost and weight. More Info
Check control valves
Check control valves are used to allow fluid through the valve in only one direction. Once the liquid or gas enters the valve, it may only exit at the other end. More Info
Cone sleeve pinch control valve
Designed for control applications and low-maintenance. Corrosion resistant, abrasion resistant and pressure containment. More Info
Globe control valves
Consists of a moveable plug that either allows flow through the spherical valve, or restricts it.
More Info
Steam traps - continuous condensate control valve
The valve traps steam on the inside of and when there is condensation to deposit, the valve opens. If there is only steam the valve closes.
More Info