Pressure
Sensors

Red Valve Pressure Sensors are the industry standard for protecting instrumentation and assuring accurate, dependable pressure measurement of slurry and corrosive fluids.
RED VALVE
Redvalve


view site »

view brochure »

Industry Standard Pressure Sensors

Red Valve Pressure Sensors are the industry standard for protecting instrumentation and assuring accurate, dependable pressure measurement of slurry and corrosive fluids.

The line pressure is sensed 360° through the flexible rubber sleeve. The captive fluid is displaced through the pressure sensor body to the instrument's Bourdon tube. All instruments are isolated and protected from the process, assuring positive and accurate readings.

All Red Valve Pressure Sensors and gauges are tested and calibrated through the mid-range to assure the highest level of accuracy. Pressure gauges, transmitters, transducers, recorders, differential pressure and vacuum switches can be factory-installed on any sensor model.

The outer layer of the joint is chosen to be compatible with the environment in which the joint is to be installed, usually Neoprene or Butyl. This allows the joint to stand up to occasional contact with oils, corrosion, and weathering.

Features

  • Alleviate piping stress, noise and vibration
  • Permit axial compression and elongation
  • Permit lateral and angular movement
  • Are non-corrosive and abrasion-resistant elastomers  
  • Full face integral flanges, no gaskets necessary
  • Sizes 1" to 108"
  • Heavy-duty, steel wire reinforced construction
  • Made in U.S.A.